Silvercrest SL 65 T Instruções de Operação descarregar pdf (Página 19)

Multi-Satellite Installation

Example: Dish with 3 LNB5 set for Astra-1 (19.2°E), HotBird (13°E), Astra-2 (28.2°E).

LNB5 are connected to a 4 way DiSEqC switch.

Align each LNB by connecting it directly to the receiver without the DiSEqC switch.

When all LNBs are aligned, connect to the receiver via the DiSEqC switch. Note which

LNB is connected to which switch input.

Press MENU > Antenna Setup > OK

Make sure that DiSEqC is set to 1.0

Set Satellite to ASTRA28EAST.

Set DiSEqC Switch to 3/4 (whichever switch input the Astra2 LNB is connected to).

Press EXIT and OK. Select TP Scan and

press OK. Select Search and press OK.

If you see a message "No program found" this means that the LNB input that you

selected is incorrect for the chosen satellite position. Please check your connections

and Set DiSEqC Switch to the correct input.

If the search is successful and produces no error message, the selection was correct.

Press EXIT.

Select Auto Scan and press OK. Select

Search and press OK.

The receiver will now produce a list of TV and Radio channels. This can take ten minutes

or more. A progress bar will be displayed. Please wait until it's ﬁnished.

Press EXIT twice.

Press OK and select a programme to watch.

To select a different satellite press LIST then use the V, V+ keys to select the

satellite.

Page 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Sem comentários

Silvercrest SL 65 T Instruções de Operação Página 19